Manual Transmission in and Ready for Dc motor Adapter plate

Modified Transmission mount

9" Motor Test fit

The front and rear ureathane bushings in and new coilover shocks, makes for a good ride

The Air ducting for the comm end of the motor, Keeps the water out also

The tranny back from the rebuilders

The flywheel getting lightened, no more ring gear, it lost 4 lbs of metal

The custom taper lock hub, eight 1/2" bolts should hold the flywheel on!!!

The Batteries in the rear tray

Fitting all the front control items

The Tranny and motor installed for good

The motor lower air ducting

The Car runs!!

speed test are complete Up to 95mph and 0-60 in 5sec

Range is still being tested, we had a controller setback, It fried!!

Will get the new controller in and do some more range testing

The Air ducting system works perfect with 20 miles

thru 90 deg weather the controller and motor were a cool 105 degF

The Vacuum Tank was extended  4" for more braking power

All components fit tight and are completely sealed

from any water and dust.